|
- 韩英,【SCI4区通讯作者韩英】Improved Compressive Properties of TiAl Alloy with Ultrafine/Fine Grains Prepared by High-Energy Ball Milling and Hot-Pressing Sintering.JMEP,2022:1
- 韩英,【未见刊】A short review on the role of alloying elements in duplex stainless steels.Tungsten,2022:1
- 韩英,【SCI3区通讯作者韩英】Microstructures and mechanical properties of cold-rolled 21Cr lean duplex stainless steel with medium to high cold rolling reductions.Materials Today Communications,2022:1
- 韩英,【SCI1区通讯作者韩英】Evolution of Cu-rich phase in Al-modified ferrite stainless steel during short-term ageing.Materials and Design,2022:1
- 韩英,【SCI1区通讯作者韩英】Cu-rich nanoprecipitates modified using Al to simultaneously enhance the strength and ductility of ferritic stainless steel.JMST,2022:1
- 韩英,【SCI2区通讯作者韩英】Achieving superior strength and ductility of AlSi10Mg alloy fabricated by selective laser melting with large laser power and high scanning speed.Acta Metallurgica Sinica (English Letters),2022:1
- 韩英,【SCI通讯】Precipitation of Cu- and Nb-rich phases and its strengthening effect in 17Cr ferritic stainless steel during high-temperature creep process.MC,2021:1
- 韩英,【SCI通讯】Microstructural characterization of aging precipitation behavior of 17Cr-0.86Si-1.2Cu-0.5Nb ferritic stainless steel.MC,2021:1
- 韩英,【SCI通讯】High-Temperature Creep Behavior and Microstructural Evolution of a Cu-Nb Co-Alloyed Ferritic Heat-Resistant Stainless Steel.Acta Met Sin,2021:1
- 韩英,【SCI通讯】Microstructure and Mechanical Properties of Powder Metallurgical TiAl-Based Alloy Made by Micron Bimodal-Sized Powders.JMEP,2021:1
- 韩英,【SCI通讯】High-Temperature Oxidation Behavior of a Cu-Bearing 17Cr Ferritic Stainless Steel.Scanning,2020:1
- 韩英,【SCI通讯】Influence of aging time on microstructure and corrosion behavior of a Cu-bearing 17Cr-1Si-0.5Nb ferritic heat resistant stainless steel.Acta Metallurgica Sinica-English Letters,2020,33(9):1
- 韩英,【SCI通讯】Tensile properties and microstructural evolution of an Al-bearing ferritic stainless steel at elevated temperatures.Metals,2020(10):1
- 韩英,【SCI通讯】Flow Characteristics of a Medium–High Carbon Mn-Si-Cr Alloyed Steel at High Temperatures.JMEPG,2019:1
- 韩英,【SCI】Effects of temperature and strain rate on the dynamic recrystallization of a medium-high-carbon high-silicon bainitic steel during hot deformation.Vacuum,2018,148:1