|
- 郝兆朋,程钢,范依航,范依航.Research on surface roughness prediction in turning Inconel 718 based on Gaussian process regression.Physica Scripta,2022:1
- 郝兆朋,程钢,范依航,范依航.Dynamic plastic evolution mechanism in cutting zone of nickel-based superalloy GH4169.Journal of Materials Processing Tech,2023:1
- 郝兆朋,邱圆,范依航,范依航.Research on Strengthening Mechanism of Rare Earth Cemented Carbide Tool Material.Journal of Engineering Materials and Technology,2022:1
- 郝兆朋,张涵,范依航,范依航.Cutting performance of the nanotwinned cBN tool in nano-cutting of Ni-Cr-Fe alloy.Journal of Manufacturing Processes,2023:1
- 郝兆朋,王馨笛,范依航,范依航.Influence of cutting parameters on cutting specific energy of Inconel718 based on strain gradient.PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE,2023:1
- 郝兆朋,程钢,范依航,范依航.Research on tool stick-slip erosion wear mechanism in cutting nickel-based alloy GH4169.Tribology International,2023:1
- 郝兆朋,胡锦灿,范依航,范依航.Research on the dynamic plasticity mechanism of additive manufactured nickel–chromium–molybdenum corrosion-resistant alloy steel under impact load.Engineering Failure Analysis,2023:1
- 郝兆朋,徐相林,范依航,范依航.Deformation mechanisms in the cutting process of SiCp/Al composites using the molecular dynamics (MD) approach.proceedings of the institution of mechanical engineers part B-Journal of ENGINEERING MANUFACTURE,2023:1
- 郝兆朋,程钢.（EI，第二作者，学生第一）单晶硅超声振动辅助切削亚表面裂纹损伤检测算法.吉林大学学报（工学版）,2022:2
- 郝兆朋,付文仓,范依航.【SCI4区第一作者郝兆朋通讯作者范依航】Theoretical Calculation and Performance Analysis of Four-Element Metal Nitride Coatings Based on First Principles.JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,2022:1
- 郝兆朋,付文仓,范依航.（SCI4区第一作者郝兆朋通讯作者范依航）Interface Bonding Mechanism of Ti3Al0.125Cr0.875 N/WC Carbide: A First Principles Study.JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE,2022:1
- 郝兆朋,张涵,范依航.（SCI1区第一作者郝兆朋通讯作者范依航）Mechanical response of nanoindentation and material strengthening mechanism of nt-cBN superhard materials based on molecular dynamics.INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS,2022:1
- 郝兆朋,张涵,范依航.（SCI2区第一作者郝兆朋通讯作者范依航）Wear mechanism of nanotwinned cBN tools in nano-cutting Ni-Cr-Fe alloy by molecular dynamics simulation.JOURNAL OF MANUFACTURING PROCESSES,2022:1
- 郝兆朋,程钢,范依航.【SCI2区第一作者郝兆鹏通讯作者范依航】Material dynamic behavior in cutting zone of Inconel 718 and its influence on cutting process.ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING,2022:1
- 郝兆朋,娄在祯,闫永达,耿延泉.（SCI二区通迅作者郝兆朋）The effect of anisotropy of nickel-based single crystal alloys on the surface quality of sub-nanometer and near atomic scale cutting.INTERMETALLICS,2022:1