点击次数：

所属单位：化学工程学院

发表刊物：Journal of Macromolecular Science, Part B

项目来源：其他课题

关键字：ABS/PMMA blends, extrusion, injection, mechanical properties

摘要：Poly(methyl methacrylate) (PMMA) can improve the mechanical and optical properties of poly(acrylonitrile-butadiene-styrene) (ABS). The blends of ABS and PMMA are applied to produce electrical enclosures with high requirements for gloss and hardness. Knowledge about the processing conditions that influence the blends of polymers are important to achieve the best material properties. In our research described here, ABS/PMMA blends and their testing samples were separately prepared under various processing conditions based on polymer blending theory. The influence of extrusion (times) and injection (temperatures and pressures) conditions on the mechanical properties and morphologies of the ABS/PMMA blends were investigated. Appropriate processing conditions and optimal mechanical properties of the ABS/PMMA blends were obtained. The blends following extrusion processing twice had better impact strength, tensile properties and bending properties than those prepared with only one extrusion processing. The blends prepared under injection processing conditions (220 °C, 70MPa) had better mechanical properties than those prepared under other conditions. Therefore it was possible to correlate the processing conditions with the evaluated mechanical properties.

第一作者：马剑英

论文类型：期刊论文

页面范围：1

是否译文：否

发表时间：2023-05-04