所属单位：机电工程学院
发表刊物：Advanced Materials Research
项目来源：省、市、自治区科技项目
关键字：Polishing device, Aspheric surface, Feeding model, Residual error model
摘要：Abstract. Based on a new polishing device, the feeding model and residual error model are established according to the movement relationship of the polishing tool and the workpiece in the process. From the feeding model we can get the feed of the polishing tool in the process. And the residual error model can be used to obtain the scallop height after polishing and we can adjust the polish-step length rationally to improve machining accuracy. The two models can provide the theory basis for polishing aspheric. It confirms the exactitude and effectiveness of the two models through the simulation analysis results.
第一作者：李迎春
论文类型：论文集
卷号：476-478
页面范围：1
字数：1
是否译文：否
发表时间：2012-02-27