|
- 高嵩,孙荧力,李奇涵,郝兆朋,张邦成,谷东伟,王国涛.Research on the hot tensile deformation mechanism of Ti-6Al-4 V alloy sheet based on the α + β dual phase crystal plasticity modeling.Journal of Alloys and Compounds,2023,932:1
- 高嵩,何童贵,李奇涵,孙荧力.【SCI3区第一/通讯作者高嵩】Anisotropic behavior and mechanical properties of Ti-6Al-4V alloy in high temperature deformation.Journal of Materials Science,2022,57(57):1
- 高嵩,孙荧力,李奇涵,何童贵.【SCI4区第一/通讯作者高嵩】Multi‑points 3D Stretch‑Press‑Bending Process for Forming of W‑Shaped Mirror‑Symmetrical Structural Parts.International Journal of Precision Engineering and Manufacturing,2022,23(23):1
- 高嵩,李奇涵,桑晔,孙荧力,吴宇航,王浩然.【SCI2区第一/通讯作者高嵩】Constitutive modeling and microstructure research on the deformation mechanism of Ti-6Al-4V alloy under hot forming condition.Journal of Alloys and Compounds,2022,892(892):1
- 高嵩,Anisotropic Behavior and Mechanical Properties of Ti-6Al-4V Alloy in High Temperature Deformation.[J]JOURNAL OF MATERIALS SCIENCE,2021
- 高嵩,Research on Springback Characteristic in Flexible Multi-points 3D Stretch-bending Process.[J]PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE,2021
- 高嵩,孙荧力,李奇涵.Multi-points 3D Stretch-Press-Bending Process for Forming of W-shaped Mirror-Symmetrical Structural Parts.[Journal].韩国:International Journal of Precision Engineering and Manufacturing,2021
- 高嵩,桑晔,李奇涵.Constitutive modelling and microstructure research on the deformation mechanism of Ti-6Al-4V alloy under hot forming condition..荷兰:JOURNAL OF ALLOYS AND COMPOUNDS,2021
- 李奇涵,高嵩,徐传伟.Numerical investigations of the clinching process and the failure prediction of clinched joints for dissimilar sheets.[Journal].美国:Part C: Journal of Mechanical Engineering Science
- 高嵩,孙荧力,李奇涵.非对称高铁列车车头窗口下梁的三维拉压复合弯曲精确成形.[Journal].中国-北京:机械工程学报
- 高嵩,吴宇航,李奇涵,桑晔,何童贵,孙荧力,王浩然.铝型材三维拉弯成形回弹预测的理论解析与数值模拟.[J].中国-北京:锻压技术,2021,46(4):143-149
- 李奇涵,高嵩,韩小亨.基于 Kriging 模型的钢铝异质板料无铆钉铆接结构工艺参数优化.[Journal].中国-北京:锻压技术
- 李奇涵,高嵩,徐传伟,韩小亨,赵庆明,谷东伟,马风雷.高强钢-铝合金异质薄板无铆成形连接试验.[Journal].中国-武汉:中国机械工程,2021,32(15):1861-1867
- 李奇涵,高嵩,王宝中,徐传伟,马风雷,韩小亨,袁博.高强钢-铝合金材料的流动应力模型研究及应用.[Journal].中国-重庆:精密成形工程,2021,13(4):121-126
- 李奇涵,高嵩,刑继刚,景淑帆,何童贵,徐传伟,韩小亨,王宝中.5052铝合金方盒件冲压成形变压边力技术.[Journal].中国-北京:锻压技术,2020,45(9):51-56