Current position: Home >> Scientific Research >> Paper Publications
高嵩

Personal Information

Professor  
Supervisor of Doctorate Candidates  
Supervisor of Master's Candidates  

Paper Publications

双脉冲激光诱导光谱结合多变量GA-BP-ANN检测合金钢中C元素

Hits:

Journal:PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE

Funded by:"National Natural Science Foundation of China (No.51805045); Scientific and Technological Developing

Abstract:The problem of springback is one of the most significant factors affecting the forming accuracy for aluminum 3D stretch-bending parts. In order to achieve high-efficiency and high-quality forming of such kind of structural components, the springback behaviors of the AA6082 aluminum profiles are investigated based on the flexible multi-points 3D stretch-bending process (3D FSB). Firstly, a finite element simulation model for the 3D FSB process was developed to analyze the forming procedure and the springback procedure. The forming experiments were carried out for the rectangle-section profile to verify the effectiveness of the simulation model. Secondly, the influence of tension on springback was studied, which include the pre-stretching and the post-stretching. Furthermore, the influences of the bending radius and bending sequence are revealed. The results show that: (1) The numerical model can be used to evaluate the effects of bending radius and process parameters on springback in the 3D FSB process effectively. (2) The pre-stretching has little effect on the horizontal springback reduction, but it plays a prominent role in reducing the springback in the vertical direction. (3) The increase of bending deformation in any direction will lead to an increase of springback in its direction and reduce the springback in the other direction. Besides, it reduces the relative error in both directions simultaneously. This research established a foundation to achieve the precise forming of the 3D stretch-bending parts with closed symmetrical cross-section.

First Author:高嵩

Indexed by:Journal paper

Discipline:Engineering

Document Type:J

Translation or Not:no

Date of Publication:2021-07-01

Included Journals:SCI

Pre One:The study on detection method of binary mixed gas based on MOS sensor arrays

Next One:Design of an Electronic Nose System for Exhaled Gas Markers of Acute Kidney Injury Patients